No results were found for the filter!
ZINC SPRAY BRIGHT - Fast-drying, smooth surface film that is free of pores
- Excellent suitability for ferrous metals
- High adhesive strength and high resistance to abrasion
- High resistance to dirt and water
- High gloss level
- Colour identity with freshly galvanized metals
- Penetration during welding possible at all times due to high metal content
- Possibility of recoating with paint without further priming
ZINC SPRAY - Fast-drying corrosion protection for metallic surfaces
- Ability for spot-welding and electric conductivity
- Heat-resistant up to +500 °C
- 99% of zinc purity
LEAK DETECTOR - Easy controlling of leaking spots
- Product is non-flammable and non-corrosive
- Temperature range: 0 °C to +50 °C
RUST DISSOLVER WITH MOS2 - Corrosion-resistant bonds prevent new long-term corrosion
- Easy finding and controlling of leaking spots
- Temperature range: 0 °C to +50 °C
- Product is non-flammable and non-corrosive
02K22UF - Universal product with medium viscosity for easily dismantled screwed joints
- Max. Thread diameter: M 36
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 to +180 °C
- Viscosity: 800 - 1,500 mPas
02K41UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M12
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 300 - 700 mPas
02K42UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M36
- Hand-tight after 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 1,500 - 4,000 mPas
02K45UF - Secured screws moderately difficult to dismantle with tools
- Max. Thread diameter: M80
- Hand-tight after approx. 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 2,500 - 6,000 mPas
02K90UF -
Capillary effect: Product can penetrate into thread interstices
- Max. Thread diameter: M6
- Hand-tight after approx 40 - 60 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 10 - 20 mPas
02K43UF - DVGW approval (DIN EN 751-1 Class H)
- Max. Thread diameter: M36
- Handling Cure Time 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 1,500 - 4,000 mPas
Viewed
