No results were found for the filter!
05K72UF - DVGW approval (DIN EN 751-1 Class H)
- Particularly suitable for sealing conical/cylindrical tube fittings
- Max. thread diameter: M80
- Handling Cure Time: 15 - 20 min
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 15.000 - 25.000 mPas
06K01UF - For the fixture of bearings, sockets and cases in their delivered condition
- Especially for small gap filling abilities
- Max. gap filling ability: 0,15 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 100 - 200 mPas
06K03UF - Fast curing with high strength
- For static shear stress and dynamic loads
- Max. gap filling ability: 0,15 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 100 - 200 mPas
06K41UF - Universal, medium-strength adhesive
- Reliable replacement of mechanical safety elements such as keys or wedges
- Max. gap filling ability: 0,2 mm
- Handling Cure Time: 20 - 30 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 400 - 700 mPas
06K60UF - Can be drilled, shaped and grinded after full curing
- Perfectly suited for worn out ball bearings
- Max. gap filling ability: 0,3 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 200.000 - 600.000 mPas
05K10UF - Extremely high resistance to water, gas, oil and technical chemicals
- Max. gap filling ability: 0,25 mm
- Tangible after approx. 10 - 20 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 80.000 - 160.000 mPas
05K74UF - Seals against water, compressed air, gas & petrol
- Replaces all types of flange gaskets
- Density: 1.09-1.13 g/ml
- Max. gap filling ability: 0,25 mm
- Tangible after approx. 5 - 20 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 23.000 - 35.000 mPas
05K73UF - Particularly user and environmentally friendly
- Without hazardous substance labeling
- Density: 1,11-1,15g/ml
- Opt. gap filling ability: 0,2 mm
- Handling cure time ca. 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 35.000 - 60.000 mPas
05K18UF - Drain-proof: Mounting also possible on vertical surfaces or for overhead work
- Density: 1,09-1,13 g/ml
- Max. gap filling ability: 0,25 mm
- Handling cure time ca. 5 - 20 Minuten
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 200.000 - 700.000 mPas
06K38UF - Fast-curing universal product with highest strength
- For static shear stress and dynamic loads
- Max. gap filling ability: 0,3 mm
- Handling Cure Time: 5 - 10 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 3.000 - 6.000 mPas
06K48UF - For fastening screws in as-delivered condition, without cleaning
- For heavily stressed screw connections
- Max. gap filling ability: 0,2 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 400 - 700 mPas
ANAEROBIC ACTIVATOR - Accelerates the reaction of anaerobic adhesives
- Support for rapid curing of inactive materials
- Greater occupational safety: Free from DMPT, therefore less toxic and still freely available after September 2025
- Optimum spray pattern and low reaction odour
- Recommended application temperature: +10 °C to +30 °C
- Spray distance: 30 cm
Viewed
