No results were found for the filter!
06K38UF - Fast-curing universal product with highest strength
- For static shear stress and dynamic loads
- Max. gap filling ability: 0,3 mm
- Handling Cure Time: 5 - 10 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 3.000 - 6.000 mPas
06K48UF - For fastening screws in as-delivered condition, without cleaning
- For heavily stressed screw connections
- Max. gap filling ability: 0,2 mm
- Handling Cure Time: 5 - 15 minutes
- Temperature resistance: -55 °C to +180 °C
- Viscosity: 400 - 700 mPas
ANAEROBIC ACTIVATOR - Accelerates the reaction of anaerobic adhesives
- Support for rapid curing of inactive materials
- Greater occupational safety: Free from DMPT, therefore less toxic and still freely available after September 2025
- Optimum spray pattern and low reaction odour
- Recommended application temperature: +10 °C to +30 °C
- Spray distance: 30 cm
MS POLYMER WHITE - Elastic and moisture-hardening adhesive and sealant for assembly and engineering
- Weather- and moisture resistant
- does not contain any silicone, isocyanates or solvents
- high temperature resistance
MS POLYMER BLACK - Elastic and moisture-hardening adhesive and sealant for assembly and engineering
- Weather- and moisture resistant
- does not contain any silicone, isocyanates or solvents
- high temperature resistance
- High resistance to UV in MS POLYMER white, grey and black
MS POLYMER CONSTRUCTION WHITE - Elastic and moisture-hardening adhesive and sealant for assembly and engineering
- Weather- and moisture resistant
- Free from isocyanates, solvents and silicones
- High temperature resistance
- High stability and tensile strength
- Wet-on-wet recoatable
- Low volume shrinkage
- No blistering
- Odorless
- UV resitant
MS POLYMER CONSTRUCTION BLACK - Elastic and moisture-hardening adhesive and sealant for assembly and engineering
- Weather- and moisture resistant
- Free from isocyanates, solvents and silicones
- High temperature resistance
- High stability and tensile strength
- Wet-on-wet recoatable
- Low volume shrinkage
- No blistering
- Odorless
- UV resitant
MS POLYMER UNIVERSAL ADHESIVE CLEANER - Optimizing the adhesive strength of sealants based on MS Polymer
- Cleaning of surfaces before bonding
- Fast curing time
- Residue-free flash-off
- Fluorescent
MS POLYMER PLASTIC AND LACQUER PRIMER - High adhesion for adhesives and sealants based on MS Polymer, methyl methacryl as well as polyurethane on various substrates
- Adhesion on porous surfaces
- User-friendly formula: free of isocyanates
MS POLYMER POLYPROPYLENE PRIMER - Optimized adhesion
- Pre-treatment of various plastics, especially polypropylene (PP)
MS POLYMER SPRAYABLE OCHRE - For indoor and outdoor use
- Permanently elastic
- Free from isocyanates, solvents and silicones
- Thin-layer sealing
- High temperature resistance
- Wide range of adhesion even without primer
- Good stability
- Absorbs acoustic and mechanical vibrations
- Protects against corrosion
- Weatherproof
MS POLYMER 2K BOOSTER BLACK - Accelerated, elastic and moisture-curing construction adhesive
- Free of isocyanates, solvents and silicones
- No cracking of paint and no sagging of the paint over the sealing seam
- UV-stable
Viewed
